sglux

UV is our Business

  • Deutsch
  • English
  • Español
  • Français
Search
Generic filters
Exact matches only
  • produkte
  • Wissenschaftliche Arbeit
  • Über Uns
  • Kontakt
Startseite / Produkte / UVA / SG01D-A18ISO90 / 

SG01D-A18ISO90

  • UVA
  • 0,50 mm² Detektorfläche
  • TO18-Gehäuse hermetisch gekapselt, zwei isolierte Pins, ein zusätzlicher Massepin
  • 10 µW/cm² Bestrahlung bei 331 nm (Peak-Empfindlichkeit) erzeugt einen Strom von ca. 1,85 nA
  • SiC UV-Photodioden-Chip mit hoher Strahlungsfestigkeit (durch PTB festgestellt)

Einzelpreis: 79,00€

  • Beschreibung
  • STEP Datei
  • Staffelpreise

Download Datenblatt

STEP Datei

Download STEP Datei

Staffelpreise

ab 1 Stück = EUR 79,00 / Stk.
ab 10 Stück = EUR 65,00 / Stk.
ab 100 Stück = EUR 57,00 / Stk.

Warenkorb

Zu diesem Produkt berät Sie gerne

Romana Sonnenberg
Dipl.-Ing.

+49 (0) 30 53015211
Gabriel Hopfenmüller
Dipl.-Ing.

+49 (0) 30 53015211
Tilman Weiss
Dr.-Ing.

+49 (0) 30 53015211
Niklas Papathanasiou
Dr. rer. nat.

+49 (0) 30 53015211

Zubehör

  • VOLTCON

    Einzelpreis: 59,00€Messumformer Photostrom auf Spannung 0 - 5 V, vier Varianten erhältlich: Messbereiche 500 pA, 50 nA, 5 µA und 500 µAMessumformer Photostrom auf Spannung 0 - 5 VEinzelpreis: 59€Produktbeschreibung

  • AMPCON

    Einzelpreis: 59,00€Messumformer Photostrom auf Strom 4 – 20 mA, drei Varianten erhältlich: Messbereiche 25 nA, 2,5 µA und 250 µAMessumformer (Stromverstärker) mit Ausgangsstrom von 4 - 20 mAEinzelpreis: 59€Produktbeschreibung

  • Multiboard (TW-MF2CAB)

    Einzelpreis: 99,00€2-Kanal-Messumformer Photostrom auf Spannung 0 - 4 V, Messbereich durch Jumper von 400 nA bis 40 µA wählbar. Ideale Eignung als Experimentierplatine, wenn das Niveau des zu messenden Photostroms noch unbekannt ist. Universeller 2-Kanal MessverstärkerEinzelpreis: 99€Produktbeschreibung

  • Digiboard

    Einzelpreis: 149,00€Messumformer zur Wandlung von Photostrom in eine Spannung von 0 - 3 V und von Photostrom zu einer Frequenz. Der zusätzliche Schwellwertschalter mit einstellbarer Schaltschwelle und Hysterese erlaubt die Nutzung des Digiboards als einfache Controller-Einheit. Der Messbereich ist durch Jumper von 300 nA bis 30 µA einstellbar. Ein Potentiometer erlaubt den Abgleich der Platine auf einen bestimmten Spannungs-Ausgangswert. Der Frequenzaugang bietet einen hohen Dynamikbereich von 6 Dekaden.Universeller 2-Kanal Strom-/SpannungsverstärkerEinzelpreis: 149€Produktbeschreibung

  • SGCD4

    Einzelpreis: 520,00€Das SGCD4 ist ein Digitalisierungsmodul für kleine Ströme. Es verfügt über vier am PC schaltbare Empfindlichkeitsbereiche und kann Ströme vom pA-Bereich bis hin zu 30 µA einfach und präzise erfassen. Das SGCD4 kann auch ohne messtechnische Vorkenntnisse benutzt werden. Die Lieferung erfolgt inkl. PTB-rückführbarer Kalibrierung.Digitalisierungsmodul für kleine Ströme, schaltbare Empfindlichkeitsbereiche, Stromerfassung vom pA-Bereich bis 30 µAEinzelpreis: 520€Produktbeschreibung

  • RADIKON-simple

    Einzelpreis: 155,00€Funktionsweise wie VOLTCON oder AMPCON (wählbar). Robustes geschirmtes Gehäuse mit BNC-Eingang.Verstärkerbox zur Umwandlung des Photostroms Einzelpreis: 155€Produktbeschreibung

  • RADIKON

    Einzelpreis: 390,00€Das RADIKON ist ein universeller Messwertaufnehmer mit einstellbaren Schaltpunkten und galvanisch getrennter Eingangsstufe. Mögliche Eingänge sind Photoströme (bis 5 µA), Spannungen (0 bis 10 V) oder Stromschleifen (4 bis 20 mA). Nach außen steht ein 0 - 10 V Ausgang und ein 230 V Relaiskontakt zur Verfügung.Universeller Industrie-Messwert-Controller zum SchaltschrankeinbauEinzelpreis: 390€Produktbeschreibung

  • SENSOR MONITOR 5.0

    Einzelpreis: 490,00€ – 735,00€Mess- und Steuermodul zur Überwachung und Automatisierung von Bestrahlungsprozessen. Das Gerät bietet die Anzeige von Bestrahlungsstärke- und Dosisinformationen für bis zu zwei UV-Sensoren sowie drei programmierbare Relais zur Steuerung mehrstufiger Bestrahlungsprozesse.Mess- und Steuermodul zur Überwachung und Automatisierung von BestrahlungsprozessenEinzelpreis: 490€Produktbeschreibung

  • Photodiode Amplifier Dual

    Einzelpreis: 420,00€Basiert auf dem Multiboard, robustes Gehäuse, ideale Eignung für wechselnde Laboraufbauten.Zwei-Kanal-PhotostromverstärkerEinzelpreis: 420€Produktbeschreibung

  • Photodiode Amplifier Connect

    Einzelpreis: 450,00€Basiert auf dem Digiboard, robustes Gehäuse, ideale Eignung für wechselnde Laboraufbauten.Photostromverstärker mit RelaisausgangEinzelpreis: 450€Produktbeschreibung

FAQ

This content is only available in English
What is the detector speed?
The detector risetime / falltime is calculated by that formula: tr/f = 2 Pi RC with R = internal resistance of the amplifier and C = capacitance of the photodiode. Example = a typical value of R is 50 Ohm and the C value for a SG01S photodiode is 15 pF. This calculates: with R = internal resistance of the amplifier and C = capacitance of the photodiode tr/f = 2Pi * 50 Ohm * 21 * 10-12 F = 6.59 * 10-9 s = 6.59 ns
What is the saturation of a photodiode?
The saturation current Isat of a photodiode is determined by its open circuit voltage VOC and its serial resistance RS following the formula: Isat = VOC / RS A typical value (SiC photodiode) for VOC is 2.0 V and for RS = 5 Ohm. This calculates: Isat = 2.0 V / 5 Ohm = 0.4 A = 400 mA. The saturation radiant intensity z calculates by the below formula: z = Isat / (S * A) Where S is the radiant sensitivity of a photodiode and A is the active area. A typical value for S is 0.13 A/W and A = 0.06 mm2 (valid for SG01S). This calculates: zsat = 0.4 A / (0.130 A/W * 6 * 10-8 m2 ) = 51.28 MW/m2 = 5.13 kW/cm2
What are typical rise and fall time of different UV photodiodes?

 

Capacitance C

tr = 2Pi
RC
(R = 50 Ohm)

SG01S-18

15 pF

4.7 ns

SG01M-18

50 pF

15.7 ns

SG01L-5

250 pF

78.5 ns

Is your UVC photodiode compliant to DVGW W294 (2006)?
Yes, f1,Z is smaller than 0.25
What is the lowest pressure that the photodiode can withstand?
Our UV photodiodes are hermetically sealed and can be used under vaccum, theoretically down to 0 Pa.
When is a filtered UV photodiode needed?
Our four filtered versions of the UV photodiode lead to a tighter sensitivity range.
What is the power input of a Multiboard?
The current consumption of a Multiboard is between 4 mA and 20 mA, depending on the amount and type of operating voltage (uni / bipolar) as well as the load at the output (multimeter = no load).

Messumformer für Photodioden
Impressum
Datenschutz
  • produkte
  • Wissenschaftliche Arbeit
  • Über Uns
  • Kontakt
Wir verwenden keinerlei Cookies zur Speicherung oder Analyse Ihres Verhaltens auf unserer Webseite. Ein technischer Cookie wird aber für die Warenkorb-Funktion unseres Internet-Shops sowie für die Sprachauswahl benötigt.
Impressum | Datenschutz
Ich akzeptiere Cookies