UV is our Business

Safester UVI

radiomètre pour l’évaluation des dangers du rayonnement UV naturel sur les lieux de travail selon la norme ISO 17166 (indice UV)
avec écran graphique
comprenant un capteur UV calibré, un certificat de calibrage, un smartphone à la base du système Android et un câble de recharge
livraison dans la mallette de transport

Prix unitaire: 1.010,00€

Description

Télecharger la fiche de données

Nous vous conseillons avec plaisir sur ce produit

Romana Sonnenberg
Dipl.-Ing.

+49 (0) 30 53015211

Gabriel Hopfenmüller
Dipl.-Ing.

+49 (0) 30 53015211

Tilman Weiss
Dr.-Ing.

+49 (0) 30 53015211

Safester UVI FAQ

Can I also connect sensors, e.g. from the Radiometer SXL 55, to a Safester UVI hand-held device?

No. Only sensors with an appropriate calibration can be connected to the Safester UVI. The device would issue an error message.

What value is determined with the Safester UVI?

The Safester UVI is determined as a variable value at the measuring point over the course of the day. Strictly speaking, this is not in accordance with the UVI definition*, but is also shown in the measurement network of the Federal Office for Radiation Protection. It enables a clear representation of the current UV irradiance and thus provides a very good guide for the type of sun protection measures to be taken. *Definition: The UV index describes the expected daily peak value of sunburn-inducing UV radiation on the ground.

Radiomètres UV FAQ

Which waterproof UV measuring device can I operate permanently outdoors?

sglux offers the UV transmitter, a solar-powered network node with a connection to the mobile phone network or the UVMicrolog data logger. Both devices can be equipped with different sensors and different calibrations.

Which device is suitable for a belt application (sterilization or curing line)?

sglux is specialized in in-line monitoring, i.e. the continuous monitoring of emitters using permanently installed sensors. By using the radiation-hard semiconductor material SiC, this is also possible at very high irradiation. If the design of the system does not permit in-line monitoring, the uvLink or the UVMicrolog can move across the conveyor belt.

Which devices are suitable for DVGW/ÖNORM-compliant measurement?

sglux offers the UVRRM reference radiometer, which is approved for many years. If more than one or special calibrations are required (e.g. LED), the UV Radiometer SXL 55 or the UVTOUCH should be used.